Play Better Golf.
#8
Report This
assembled 3-gw of these heads with px 6 shafts wow all I can say absolutley amazing I had set of px 6 here 2-pw I “softstepped” them and spine aligned the shafts
amazing feeling clubs
going to being the SW to a D 3 on the 3-9 and D-4 on the P & g wedge (s)and I think i’ll be in for a nice suprise softstepping gives one hell of a nice feel to the clubs wow
Ballflight with these heads VERY predictable and high
Blown away THANKS
#7
Report This
245 drive, lets say a CHS of 95-100 MPH. with a quick tempo or harder shaft loading swing a stiff or 5 is fine, with a smooth tempo and easy shaft loading I guess a 4.5 or down to regular wont hurt. You will loose distance with a too stiff shaft. I went from a 6-6.5 to a 4.5-5 and gained 7 yards or something.
blade or not is not the thing. Placement of COG and distribution of metal is the only factors. All heads and also the MCC are quite equal with subtle differences in feel and more or less same playability
#6
Report This
I figured the TM 300’s were a low MPF
I hit a 7 iron 140-145 yards carry rolls to 150 TT web site says I should be playing regular flex shafts. I doubt this though…....
I hit a driver 245 average drive. I have no clue my swing speed, when i tried a titleist 909 driver in the golf store, the salesman said I was whipping the shaft like mad in the regular flex shaft!
I may soft step a set of PX 6’s I like the feel of these shafts and the trajectory
I really like the forged feel as well, these musclebacks really interest me, I know they have a higher MPF then my current irons so I am wondering what these clubs can bring me, however they are a blade so we’ll see…
Ordered 4-PW and a 54* cer oil wedge head today
#5
Report This
tricept blade also forged and hollow.
#4
Report This
MMB, TE forged, MPC are forged. The KE4 tour are only heat treated, but they have a lot of forged feel in them. Have tested them myself. In fact thinking on making a set of them with ex a KB tour 90 in 4.5 or 5. belive the TM 300 are very low in MPF, you can get same flight or stronger and much more forgiving than that. TE forged are lower in COG than MMB and the other options I gave. If you hit hard down and through they could go a tad to high and spin. If you hit flatter or pick the ball more and the speed is not the highest they are the best option. Think the shaft works with any of the heads. What about a Dynamic Gold (also HL) or a KB tour or a FST pro 125. Why 5 and not 6 in px ?
#3
Report This
would like to get a forged head love them
my tm forged 300’s are pretty much toast
I have rifle 6’s in them
thinking of going to a 5 px
any ideas?
#2
Report This
The MMBs are much more forgiving than they appear to be so with your swing speed they will work. But it could be a number of the Golfworks classic looking clubs can work and some work better than MMB. You have the TE forged, the MMB, the MPC, the KE4 tour, KE4 SS1, Tricept to choose from.
I play the MMB and love the feel of a well enough struck shot.
#1
Report This
Hi All
Thinking on the MMB irons I am a 8.8 index however I struggle with the ballstriking. I can not fade or draw at command however I am a good putter and the short game is sharp
Looking for something better than I have but still useable
MMB’s any comments? little iffy about “blades”
if you hit them wrong you know it immediatley though
was going to go 4=pw
swing a 7 iron 145 yards would a px 5 shaft be too soft? rifle say I need 5.0 even though I use stiff flex in the driver, 3 wood and hybrid.
looking to gain a few more yards in the iron dept.
Most days I can hit the 9 130
any opinions would be greatly appreciated
